Place the hose hanger rod assembly down into
the hose hanger bracket on the impeller housing
assembly. See figure 18.
Loop the 25" tarp strap under the hose. Fasten the
hooks to the hose hanger rod assembly. See figure
Place a hose clamp onto the end of the hose. Push
the hose onto the hose adapter (nozzle). Tighten the
hose damp onto the hose and hose adapter. Do not
collapse the hose adapter when tightening
clamp. See figure 19.
The remaining hose clamp will be used later to fasten
the hose to the deck adapter.
Assemble the hitch plate to the tractor hitch if:
Your tractor has a square (straight) hitch frame,
to help prevent binding.
Your tractor has a lightweight hitch frame that
needs reinforcement for towing.
Use a 1/2" x 1ol/2" hex bolt, a 7/16" flat washer and a
1/2" nylock nut. See figure 21
1/2" × 1ol/2"
7/16" FLAT WASHEBj_
1/2" NYLOCK NUT