Craftsman 486.245042 Operator's Manual page 17

FOR 1990 AND NEWER MURRAY TRACTORS
WITH A 46" DECK
Tape 46" template onto deck adapter, Mark and then
cut out adapter,
Fasten the angle bracket and the mounting bracket
to the mower deck as shown in figure 34, Use two
5/16" x 1" carriage bolts, 5/16" flat washers and 5/16"
nylock nuts, The bolt heads go on inside of mower
deck,
Drill two 5/16" diameter holes in the deck adapter
that will align with the holes in the angle bracket and
the mounting bracket, Assemble the deck adapter to
both brackets using two 1/4" x 1" hex bolts, 1/4" flat
washers, nylon washers and 1/4" nylock nuts, See
figure 28,
I \
ANGLE BRACKET 1 "' NYLOCK NUT
NYLON WASHER x MOUNTING
1/4" FLAT ,\
114"x 1 LOCATE A ND
DRILL ROLES
\ NYLON WASHER -._
114" FLAT WASHER _,
114" x1"NEX B OLT
FIGURE 28
Assemble end of hose and hose clamp over the
round opening of deck adapter and tighten clamp,
GO DIREOTLYTOTHE OPERATION iNSTRUCTIONS
WHICH ARE LOCATED ON PAGE 18.
17