Support Assembly - Craftsman 917.249901 Owner's Manual

1
BAGGER SUPPORT ASSEMBLY
(See Fig. 1)
1, Slide flanges of support assembly into drawbar slots
first, then, pivot backwards inserting pin into drawbar
pin hole,
2. Be sure support assembly is seated properly, then
secure with retainer spring.
INSERT
FLANGES
FIRST INTO
DRAWBAR
SLOTS
I
/"
DRAWBAR
PiN HOLE
/'%
SUPPORT
ASSEMBLY
DRAWBAR SLOTS
FIG. 1
RETAINER
SPRING
MOUNTING COVER ASSEMBLY TO
SUPPORT ASSEMBLY (See Fig. 2)
NOTE: For ease of assembly, you may wish to obtain the
assistance of another person for mounting cover assembly
to tractor.
1. Position cover assembly on ground behind tractor.
2. Lift and rotate coverto align cover brackets with support
assembly tubes.
3. Slide cover assembly down onto the support tubes.
COVER
ASSEMBLY
SUPPORT
ASSEMBLY
FIG. 2