Cyclic Error - Oki OKIPAGE24DX Maintenance Manual

5

Cyclic error

Image drum
Developing roller
Toner supply roller
Charging roller
Cleaning roller
Transfer roller
Heat roller
Back-up roller
Notes:
1. After replacing the image drum cartridge, set the printer in the user maintenance mode
by turning the power on while pressing the MENU key, and reset the drum counter.
(Refer to User's Manual.)
2 After replacing the fusing unit assy, set the printer in the engine maintenance mode by
turning the power on while pressing the FORM FEED and ENTER keys, and reset the
fuser counter. (Refer to See 4.1.)
40930701TH DRAFT Vesion
Frequency
3.71" (94.2 mm) Replace or clean the image drum cartridge.
2.05" (52.1 mm) Replace the image drum cartridge.
3.24" (82.24 mm) Replace the image drum cartridge.
1.37" (34.7 mm) Replace the image drum cartridge.
1.17" (29.8 mm) Replace the image drum cartridge.
2.28" (58 mm) Replace the transfer roller.
3.46" (88 mm) Replace the fusing unit assy.
3.46" (88 mm) Replace the back-up roller.
Remedy
158 /