Lcd Status Message List - Oki OKIPAGE24DX Maintenance Manual

4.3.1

LCD Status Message List

The listing of the statuses and problems displayed in the form of messages on the LCD is provided
in Table 4-1.
Classification
Jam error
Paper size error
Tray paper out
Interface Timeout
40930701TH DRAFT Vesion
Table 4-1
LCD Status Message
Notifies of occurrence of
jam while the paper is being
PAPER INPUT JAM
fed from the Multi Feeder.
CHECK FEEDER
PAPER FEED JAM
CHECK FEEDER
Notifies of incorrect size pa-
per feeding from the Multi
ERROR PAPER SIZE
Feeder.
CHECK FEEDER
Notifies of no paper state of
PAPER OUT
the Multi Feeder.
mmmmmmmm FEEDER
mmmmmmmm:
Paper size in the tray
being selected
Notifies of occurrence of
interface timeout between
ERROR
the printer and the Multi
81
Feeder.
Description
• Check the paper in the Multi Feeder.
Carry out the recovery printing by
opening the cover, removing jammed
paper and closing the cover, and then
turning the error display off.
• When the problem occurs frequently,
to through the Troubleshooting.
• Check the paper in the Multi Feeder.
Also check to see if there was a feed-
ing of multiple sheets.
Carry out the recovery printing by
opening the cover, removing paper
and closing the cover, and then turn-
ing the error display off.
• Load the paper in the Multi Feeder.
• Verify connection of AOLE-PCB and
square-shaped connector.
Replace the square-shaped connec-
tor if necessary.
• Replace AOLE-PCB.
Recovery method
233 /