Cyclic Error - Oki OKIPAGE 6e Service Manual

Cyclic Error

5
Image drum
Developing roller
Toner supply roller
Charging roller
Cleaning roller
Transfer roller
Heat roller
Back-up roller
Notes:
1. After replacing the image drum unit, set the printer in the user maintenance mode by turning
the power on while pressing the MENU key, and reset the drum counter (see User's
Manual).
2 After replacing the fusing unit assy, set the printer in the engine maintenance mode by
turning the power on while pressing the FORM FEED and ENTER keys, and reset the fuser
counter (see 4.1).
Troubleshooting
Frequency
3.71" (94.2 mm) Replace or clean the image drum unit.
1.66" (44.4 mm) Replace the image drum unit.
2.27" (57.8 mm) Replace the image drum unit.
1.56" (39.6 mm) Replace the image drum unit.
1.24" (31.4 mm) Replace the image drum unit.
2.01" (51.0 mm) Replace the transfer roller.
2.47" (62.8 mm) Replace the fusing unit assy.
2.72" (69.08 mm) Replace the back-up roller.
6 - 38
Remedy
OKIPAGE 6e/6ex
Service Manual, P/N 59276401