Oki OKIPAGE24DX Maintenance Manual page 21

Figure 2-3 shows the sensor layout diagram.
Sensor
Inlet sensor 1 Detects the leading part of the paper and gives the supervision
timing for switching from hopping operation to feeding opera-
tion.
Supervises the paper running state and the paper size accord-
ing to the paper reach time and running time.
Inlet sensor 2 Detects the form width.
Detects the leading part of the paper.
Paper sensor
Supervises the paper running state.
Supervises the paper feed and size according to the time of
Outlet sensor
arrival to the sensor and the time of passage of paper.
Detects the lack of toner.
Toner low sensor
40930701TH DRAFT Vesion
Paper running direction
Roller-Heat
Roller-transfer
Paper sensor
Toner sensor
Roller-regist
Inlet sensor 1
Inlet
sensor 2
Feed roller
Figure 2-3
Function
Roller-exit
Roller-feeder (c)
Outlet sensor
Sensing state
ON: Paper exists.
OFF: No paper exists.
ON: A4 or larger
OFF: Smaller than A4
ON: Paper exists.
OFF: No paper exists.
ON: Paper exists.
OFF: No paper exists.
ON long: Toner low exists
OFF short: No Toner low exists
21 /