Process Operation Descriptions - Oki OKIPAGE24DX Maintenance Manual

2.4.3

Process operation descriptions

(1) Hopping
Hoppings from the first tray and the front feeder are effected by a single hopping motor in the
mechanism shown below.
Front Feeder
Turning the Hopping motor in direction a (CW) drives the 1st Hopping Roller. Turning the
Hopping motor in direction b (CCW) drives the Front Hopping Roller. Gear C and Hopping
roller bult in one-way bearing, so that turning each of these gears in reverse direction will not
be transmitted to the corresponding roller.
Front Hopping Roller
(One-way clutch build-in)
40930701TH DRAFT Vesion
Hopping Motor
Gear C
(One-way Clutch build-in )
1st Hopping Roller
(One-way clutch build-in)
1st Tray
(CW)
Hopping Motor
a
(CCW)
b
Inlet Sensor
Roller-Regist
Planet Gear
Gear B
Sub Roller
Gear A
Duplex Unit
Paper
28 /