3
Paper size error
•
Is paper of the specified size used?
•
No
•
Yes
•
No
•
Is the printer recovered?
•
YES END
•
YES Does the outlet sensor lever operate smoothly.
•
No
•
Is the printer recovered?
•
YES END
•
Yes
•
Is the printer recovered?.
•
No
•
YES END
40930701TH DRAFT Vesion
Use paper of the specified size.
Do the inlet sensor lever and paper width sensor lever operate smoothly?
Replace the inlet sensor lever or paper width sensor lever.
• No
Clean the inlet sensor 1 or paper width sensor on the Power Supply
Unit (High Voltage). (See Figure 2-3 Sensor Layout Diagram.)
• Is the printer recovered?
•
No
Replace the Power Supply Unit (High Voltage).
• YES END
Replace the outlet sensor lever.
• No
Clean the outlet sensor on the Power Supply Unit (AC120V or 230V).
(See Figure 2-3 Sensor Layout Diagram.)
• Is the printer recovered?
•
No
Replace the Power Supply Unit (AC120V or 230V).
• YES END
Clean the inlet sensor 1, inlet sensor 2, and outlet sensor.
(See Figure 2-3 Sensor Layout Diagram.)
Replace the Power Supply Unit (High Voltage).
147 /