3.3.7
Roller A
(1) Remove the motor bracket assy (see 3.3.5).
(2) Remove two gears 1 and then another gear 2.
(3) Disengage the plate 3 and the frame 4.
(4) Remove four screws 5 and remove the frame 4 (see 3.3.6).
(5) Move the belt to the right and remove it from the one-way pulley 6.
(6) Move the carrier roller assembly to the right, and remove it from the shaft 7.
(7) Move the roller A 8 to the right, lift its left side, and then pull it off to the left. (Be careful not
to lose the shaft 7 being removed together.)
5
1
2
5
4
1
5
8
7
6
3
Belt
7
Carrier roller assy
6
8
230 /
40930701TH DRAFT Vesion