Oki OKIPAGE24DX Maintenance Manual page 127

2-8
Duplex FEED JAM 3
• Has a paper reached the Duplex Front sensor?
• No
• No
• Yes Is the Duplex Front sensor lever operating normally?
• Yes
• No
40930701TH DRAFT Vesion
Is the connection cord between the clutch and the Board-LEX properly?
• Yes Replace the GEAR Assy.
• YES END
• No Replace the Board-LEX.
Connect the connection cord properly.
Is the connection cord between the Duplex Front sensor and the Board-LEX
connected properly?
• Yes Does the connection cord have a break?
• Yes Replace the Duplex Front sensor (FX50 Photo Sensor).
• YES END
• No Replace the Board-LEX.
• No Connect the connection cord properly.
Replace the Duplex Front sensor lever (LEVER-Sensor (F/R) and SPRING-
Sensor (F/R)).
146 /