Lcd Message Troubleshooting - Oki OKIPAGE24DX Maintenance Manual

6.5.2

LCD message troubleshooting

If troubles are not correctable from the LCD message trouble list, follow the troubleshooting
flowcharts given here to deal with them.
No.
1. The printer does not work normally after being turned on.
2. Jam error
3. Paper size error
4. Fusing unit error (ERROR71, ERROR72, ERROR73)
5. SSIO (Synchronous Serial I/O) error
(between the Main board and the Power Supply Unit
(ERROR74)
6. I/F time-out between the printer and the operator panel
(ERROR80)
7. I/F time-out (no response) between the printer and an
optional tray (2nd tray, 3rd tray, multi feeder) (ERROR81)
8. Messages cannot be received through the parallel interface.
9. Messages cannot be received through the serial interface.
10. Data cannot be received through the OKI HSP interface.
11. I/F time-out between the printer and the Duplex unit.
Printing sequence error in the Duplex. (ERROR83, ERROR84)
Note: When replacing the Main board, install the EEPROM from the old Main board, onto the new
Main board.
40930701TH DRAFT Vesion
Trouble
Paper input jam (1st Tray)
Paper input jam (Front feeder)
Paper feed jam
Paper exit jam
Duplex INPUT jam
Duplex FEED jam
Duplex FEED jam
Duplex FEED jam
Flowchart number
1
2-1
2-2
2-3
2-4
2-5
2-6
2-7
2-8
3
4
A
)
(High voltage)
7
5
8
9
0
6
133 /