Oki OKIPAGE24DX Maintenance Manual page 126

2-6
Duplex FEED JAM1
• Is there a paper on the Duplex In sensor lever?
• No
• No
• YES Remove the paper.
2-7
Duplex FEED JAM 2
• Has a paper reached the Duplex Rear sensor?
• No
• No
• Yes Is the Duplex Rear sensor operating normally?
• Yes
• No Replace the Duplex Rear sensor lever (LEVER-Sensor (F/R) and SPRING-Sensor
(F/R)).
40930701TH DRAFT Vesion
Is the Duplex In sensor operating normally?
• Yes Is the connection cord between the Duplex In sensor and the Board-
LEX connected properly?
• Yes Does the connection cord have a break?
•
• No Replace the Duplex In sensor (FX50 Photo Sensor).
• YES END
• No Replace the Board-LEX.
• No Connect the connection cord properly.
Replace the Duplex In sensor lever (LEVER-Sensor (D-IN) and SPRING-
Sensor (D-IN)).
Is the connection cord between the clutch and the Board-LEX connected
properly?
• Yes Replace the GEAR Assy.
• YES END
• No Replace the Board-LEX.
Connect the connection cord properly.
Replace the Board-LEX.
Yes Replace the connection cord (Connection
Code-Wire).
145 /