Paper Feed Jam - Oki OKIPAGE24DX Maintenance Manual

2-3

Paper feed jam

• Does a paper feed jam occur when the power is turned on?
• Yes
• No
• No
Go to on the next page
Go to on the next page
40930701TH DRAFT Vesion
Is the paper on the paper sensor lever?
• Yes Remove the paper.
• No Does the paper sensor lever operate smoothly?
• No Replace the paper sensor lever.
• Yes Clean the paper sensor. (See Figure 2-3 Sensor Layout Diagram.)
• Is the printer recovered?
• No Replace the Power Supply Unit (High Voltage).
• YES END
Has the paper reached the paper sensor lever?
Is the Drum motor rotating?
• No Go to on the next page
• Yes Is the cluch for register roller (N0.44 in Figure 8-2) turned on ?
• No Is a cable from the clutch connected to "CLR" connector on
the main board ?
• Yes Replace the Clutch.
• Is the printer recovered?
• No Replace the Main board.
• YES END
.
A
B .
.
C
140 /