Adjustment When Replacing A Part - Oki OKIPAGE24DX Maintenance Manual

Installing Duplex Unit
(1) Hold the LEVER-Lock (Dup) in horizontal lock position.
Then insert the Duplex Unit along the groove, up to accord both rear faces between printer
and Duplex Unit.
Connector
LEVER-Release (Dup)
Note: Printer and Duplex Unit will connect automatically with built-in connector.
(2) Lock the Duplex Unit to the printer by turning the LEVER-Lock (Dup) to the next locking
position as below.
(3) From front side of printer, snap fit LEVER-Release (Dup) into the boss in Hopping Frame.
Snap Fit
(4) After installing Duplex Unit, put back the Paper Cassette into 1st Tray.
40930701TH DRAFT Vesion
Printer
Groove
Snap Fit
LEVER-Release (Dup)
Note: Before setting it to the
unit, make sure that the
LEVER-Release (Dup) is
Duplex Unit
locked at the angle as
shown Locking point
LEVER-Release (Dup)
Connector
LEVER-Lock (Dup)
B Boss
B
Snap Fit
into Boss
B - B View
Locking point
LEVER-Release (Dup)
93 /