Craftsman 27746 Instruction Manual page 4

Table of Contents

Advertisement

Stopthe engineand disengageddve to attachment
- before refueling;
- before removingthe grass catcher;
- before makingheightadjustmentunlessadjustment
can be made from the operator'sposition.
Reducethe throttlesettingdudng engine run-outand, if
theengine isprovidedwitha shut-offvalve, turn the fuel
offat the conclusionof mowing.
IV. Maintenance and Storage
Keepall nuts,boltsandscrewstightto be sure theequip-
mentis in safe worldngcondition.
Never store the equipmentwith petrol in the tank inside
a buildingwhere fumes may reach an open flame or
spark.
Allow the engine to cool before storing in any enclo-
sure.
To reducethe fire hazard,keep the engine, silencer,bat-
tery compartmentand petrol storage area free of grass,
leaves, or excessivegrease.
Check the grass catcher frequently for wear or dete-
rioration.
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done
outdoors.
On multi-bladed machines, t akecare as rotating oneblade
can cause otherbladesto rotate.
When machine is to be parked, stored or left unattended,
lower the cutting means unless a positive mechanical lock
is used.
,_
WARNING: Always disconnect spark plug wire and
place wire where it cannot contact
spark plug in
order b) prevent accidental
starting
when setting
up, transporting,
adjusting or making repairs.
4

Advertisement

Table of Contents
loading

Table of Contents