Configuring Insight Remote Support For Hp Sim 7.1 And Irs 5.7 - HP IBRIX 9300 Administrator's Manual

The time required to enable Phone Home depends on the number of devices in the cluster, with
larger clusters requiring more time.
To configure Phone Home settings from the CLI, use the following command:
ibrix_phonehome -c -i <IP Address of the Central Management Server> [-z
Software Entitlement Id] [-r Read Community] [-w Write Community] [-t
System Contact] [-n System Name] [-o System Location]
For example:
ibrix_phonehome -c -i 99.2.4.75 -P US -r public -w private -t Admin -n
SYS01.US -o Colorado
Next, configure Insight Remote Support for the version of HP SIM you are using:
HP SIM 7.1 and IRS 5.7. See
5.7" (page
HP SIM 6.3 and IRS 5.6. See
5.6" (page

Configuring Insight Remote Support for HP SIM 7.1 and IRS 5.7

To configure Insight Remote Support, complete these steps:
1. Configure Entitlements for the servers and chassis in your system.
2. Discover devices on HP SIM.
Configuring Entitlements for servers and storage
Expand Phone Home in the lower Navigator. When you select Servers, or Storage, the GUI displays
the current Entitlements for that type of device. The following example shows Entitlements for the
servers in the cluster.
NOTE: The Chassis selection does not apply to 9300 or 9320 systems.
"Configuring Insight Remote Support for HP SIM 7.1 and IRS
23).
"Configuring Insight Remote Support for HP SIM 6.3 and IRS
26).
Configuring HP Insight Remote Support on IBRIX 9000 systems 23