Hafm Server; Enabling Hafm To Manage The Director; New Product Dialog Box; Products View Page - HP Surestore 64 - Director Switch Installation Manual

Installing and Configuring the Director 2/64

HAFM Server

To run HAFM software, you must set up and configure the HAFM server.
Refer to the HAFM server installation guide for instructions on:

Enabling HAFM to Manage the Director

To manage a new director, it must be recognized by the HAFM application.
Follow these steps to enable HAFM to recognize a new director:
1. Click the Product menu and choose New from the drop-down menu. The
Figure 36: New Product dialog box
2. Type the IP address you configured earlier. See
3. Choose Director-64 from the Product Type drop-down list and click OK. A
4. Repeat this procedure for each new director.
80
Setting up the HAFM server.
Connecting the HAFM server to the LAN.
Configuring the network addressing for the HAFM server.
Setting HAFM server date and time.
Creating HAFM user names and passwords.
New Product dialog box displays, as shown in
Information" on page 73 for more information.
new director icon displays at the Products View page.
Figure 36.
"Configure Director Network
Director 2/64 Installation Guide