Laser Safety; Certification And Classification Information - HP Surestore 64 - Director Switch Installation Manual

Regulatory Compliance Notices

Laser Safety

Certification and Classification Information

This product contains a laser internal to the Optical Link Module (OLM) for
connection to the Fibre communications port.
In the USA, the OLM is certified as a Class 1 laser product conforming to the
requirements contained in the Department of Health and Human Services (DHHS)
regulation 21 CFR, Subchapter J. The certification is indicated by a label on the
plastic OLM housing.
Outside the USA, the OLM is certified as a Class 1 laser product conforming to
the requirements contained in IEC 825-1:1993 and EN 60825-1:1994, including
Amendment 11:1996.
The OLM includes the following certifications:
The following figure shows the Class 1 information label that appears on the metal
cover of the OLM housing:
134
WARNING: To reduce the risk of exposure to hazardous radiation:
• Do not try to open the laser device enclosure. There are no user-serviceable
components inside.
• Do not operate controls, make adjustments, or perform procedures to the laser
device other than those specified herein.
• Allow only Hewlett-Packard authorized service technicians to repair the laser
device.
UL Recognized Component (USA)
CSA Certified Component (Canada)
TUV Certified Component (European Union)
CB Certificate (Worldwide)
Director 2/64 Installation Guide