Installing and Configuring the Director 2/64
9. Click Next. A new screen displays for selecting ports for the alerts, as shown
Figure 50: New Threshold Alerts dialog box—third screen
10. Choose either Port Type or Port List.
11. Click Next. A final screen displays to provide a summary of your alert
106
in
Figure
50.
For Port Type, choosing either E_Ports or F_Ports will cause this alert to
generate for all ports configured as E_Ports or F_Ports, respectively.
For Port List, you can choose individual ports by clicking the check box
by each port number or set all ports. Selecting Set All Ports places a
check mark by each port number. Selecting Clear All Ports will clear the
check marks by each port number.
configuration, as shown in
Figure
51.
Director 2/64 Installation Guide