Finalize The Rack Mounting Procedure - HP Surestore 64 - Director Switch Installation Manual
Fw 05.01.00 and sw 07.01.00 director 2/64 installation guide (aa-rsngc-te/958-000289-001, june 2003)
Hide thumbs
Also See for Surestore 64 - Director Switch:
- User manual (296 pages) ,
- Planning manual (172 pages) ,
- Manual (62 pages)
Table of Contents
Advertisement
Finalize the Rack Mounting Procedure
Use the following sections to complete the installation procedure.
After completing the steps outlined in the previous sections, install the switch in
the rack as follows.
1. Carefully position the switch in the front of the rack and onto the rail tray, and
Figure 23: Positioning the switch in the rack
Director 2/64 Installation Guide
WARNING:
The Director 2/64 weighs approximately 115 pounds. Use
proper handling and lifting equipment to reduce the possibility of injury or
product damage.
slide the switch back on the rails until the front mounting brackets are against
the front rack columns.
switch.
Installing and Configuring the Director 2/64
Figure 23
illustrates using a lifting jack to position the
65
Advertisement
Table of Contents
