Verify Communication Between the Director and HAFM Server
Follow these steps to check director-to-server communication:
1. From the Products View page (as shown in
Figure 37: Products View page
Table 5: Director Operational States and Symbols
Operational—Director-to-server communication has been
established, the director is operational, and no failures are
indicated.
Degraded—Director-to-server communication has been
established, but the director is operating in degraded mode and
requires service. This condition is typical if a port or redundant
FRU fails. Go to
Director 2/64 Installation Guide
and color of the symbol behind the director icon.
symbols.
step
2.
Installing and Configuring the Director 2/64
Operational State
Figure
37), take note of the shape
Table 5
explains these
Symbol
81