Power On The Unit; Configuring The Drive; Rack Mounting - HP C6388B User Manual

9. Power On the Unit

Push in the power switch on the front of the unit to ensure that your drive is
recognized by your system during boot-up.

10. Configuring the Drive

Reference your workstation owner's guide for instructions about using the
HP-UX sam utility to configure your drive.

11. Rack Mounting

The Rack-Ready Drives can be mounted into a standard HP 19-inch rack by
using the optional HP C4317A (2 EIA units) or the C4318B (3 EIA units) rack
mount kits. See Appendix B for more details.
2-8 Disk Installation