Verify Switch Function - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Verify Switch Function

To verify that your switch is operating correctly, display information about the
switch and port status.
To display information about the switch and port status:
1. Log into the switch as the admin user.
2. Enter the switchshow command at the command line. This command
switch:admin> switchshow
switchName:
switchType:
switchState:
switchMode:
switchRole:
switchDomain:
switchId:
switchWwn:
switchBeacon:
Zoning:
port 0: id N2 Online
(upstream)
port 1: id N2 No_Light
port 2: id N2 No_Light
port 3: id N2 No_Light
port 4: id N2 No_Light
port 5: id N2 No_Light
port 6: id N2 No_Light
port 7: id N2 No_Light
switch:admin>
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
displays a switch summary and a port summary.
The following example displays the switchshow command.
Example:
switch
16.2
Online
Native
Subordinate
7
fffc07
10:00:00:60:69:c0:0e:88
OFF
ON (cfg1)
E-Port 10:00:00:60:69:c0:0f:04 "web189"
Initial Configuration
31