HP StorageWorks MSA 2/8 - SAN Switch User Manual page 131

3. At the select prompt enter 3 to delete a member based on its Port/Node WWN.
4. At the prompt enter the WWN of the member you would like to delete from
5. At the prompt enter 1 to verify the WWN you entered was deleted from the
6. Once you have verified that the WWN was deleted correctly, enter 0 at the
7. At the Update the FLASH? prompt enter Y.
8. Press Enter to update the flash and end the session.
Example:
switch:admin> msconfigure
0 Done
1 Display the access list
2 Add member based on its Port/Node WWN
3 Delete member based on its Port/Node WWN
select : (0..3) [1] 2
Port/Node WWN (in hex): [00:00:00:00:00:00:00:00]
*WWN is successfully added to the MS ACL.
0 Done
1 Display the access list
2 Add member based on its Port/Node WWN
3 Delete member based on its Port/Node WWN
select : (0..3) [2] 1
<< Continued on next page.>>
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
the ACL. Press the Return key, and the main menu is displayed.
ACL.
prompt to end the session.
The SAN Management Application
131