Description Of Configupload Options - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Initial Configuration
To save a backup copy of the configuration file to a host:
1. Verify that the FTP service is running on the host workstation (or on a
2. Log into the switch as the admin user.
3. Enter the configupload command.
Table 2: Description of configupload Options
Option
host
user
file
passwd
swd5:admin> configupload "citadel","jdoe","config.txt","passwd"
upload complete
switch:admin>
38
The second section Contains general switch configuration variables, such as
The third section
Windows machine).
Enter the command only, then enter the options as you are prompted; or enter:
configupload ["host","user","file"[,"passwd"]]
Specify a host name or IP address in quotation marks; for example,
"citadel" or "192.168.1.48". The configuration file is downloaded from
this host system. This operand is optional.
Specify a user name in quotation marks; for example, "jdoe". This user
name is used to gain access to the host. This operand is optional.
Specify a file name in quotation marks; for example, "config.txt".
Absolute path names may be specified using forward slash (/). Relative
path names create the file in the user's home directory on UNIX hosts,
and in the directory where the FTP server is running on a Windows
hosts. This operand is optional.
Specify a password in quotation marks. This operand is optional.
Example:
A message displays indicating that the upload is complete.
diagnostic settings, fabric configuration settings, and
SNMP settings. This section corresponds to the output of
the configshow command (after the first few lines),
although there are more lines uploaded than shown by the
command.
Contains zoning configuration parameters.
Description
Fabric OS Procedures Version 3.1.x/4.1.x User Guide