Check Port's External Transmit And Receive Path - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Check Port's External Transmit and Receive Path

The following procedure exercises the path of a loop from the port N transmitter,
along the parallel loopback path, and back to the same N port transmitter.
Loopback adapters are optional for this test.
This test does not exercise the SFP or the fibre cable. This test only checks
components that are attached to the switch and that are on a FC arbitrated loop.
1. Log in as admin.
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
ERR_STAT_C3DISC
ERR_STAT_CRC
ERR_STAT_ENCIN
ERR_STAT_ENCOUT
ERR_STAT_TRUNC
FDET_PERR
FINISH_MSG_ERR
FTPRT_STATUS_ERR
MBUF_STATE_ERR
MBUF_STATUS_ERR
NO_SEGMENT
PORT_ABSENT
PORT_ENABLE
PORT_M2M
PORT_STOPPED
PORT_WRONG
RXQ_FAM_PERR
RXQ_RAM_PERR
STATS
STATS_C3FRX
STATS_FTX
TIMEOUT
XMIT
Troubleshooting
225