Test Cascaded Switch Isl Links - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Troubleshooting

Test Cascaded Switch ISL Links

To tests components to/from a neighbor switch:
1. Log into the switch as admin.
2. Enter the spinfab command with the following operands (refer to the HP
Example:
switch:admin> setdbg "DIAG", 0
switch:admin> spinfab 3,0,4
spinFab running...
spinFab: Completed 3 megs, status:
port 0 test status: 0x00000000 --
port 1 test status: 0x00000000 --
port 2 test status: 0x00000000 --
port 3 test status: 0x00000000 --
port 4 test status: 0x02000000 --
220
— To check all switches attached components (on an FC loop), see
All Switch Components Between Main Board, SFP, and Fiber Cable"
page 223.
— To check all of a port's attached components (on an FC loop), see
Port's External Transmit and Receive Path"
— To view a list of additional component tests, see
Tests" on page 228.
StorageWorks Fabric OS Version 3.1.x/4.1.x Reference Guide for more
details).
[-nmegs count]
[-ports list]
[-setfail mode]
[-domain value]
Specify the number of frames to send in millions.
(Optional) Specify a list of user ports to test.
Specify a value 1 to mark failing ports as BAD, specify
a value of 0 to not mark failed ports as bad.
(Optional) Specify a specific remote domain to which
the switch is connected.
passed.
passed.
passed.
passed.
passed.
SKIPPED!
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
on page 225.
"Additional Component
"Check
on
"Check