Configuring The Policy Threshold Values - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Example:
switch:admin> switchstatuspolicyshow
The current overall switch status policy parameters:
----------------------------------
FaultyPorts
MissingSFPs
PowerSupplies
Temperatures
PortStatus
ISLStatus
switch:admin>

Configuring the Policy Threshold Values

To set the switch status policy threshold values:
1. Log into the switch as the admin user.
2. Enter the switchstatuspolicyset command at the command line.
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
Down Marginal
2
0
2
2
Fans 2
0
2
First, the current switch status policy parameter values are displayed, then you
are prompted to enter values for each DOWN and MARGINAL threshold
parameter:
— Enter the number of faulty ports required to change the switch status to
DOWN and click Enter.
— Enter the number of faulty ports required to change the switch status to
MARGINAL and click Enter.
— Enter the number of missing GBICs required to change the switch status
to DOWN and click Enter.
— Enter the number of missing GBICs required to change the switch status
to MARGINAL and click Enter.
— Enter the number of bad Power Supply warnings required to change the
switch status to DOWN and click Enter.
— Enter the number of bad Power Supply warnings required to change the
switch status to MARGINAL and click Enter.
1
0
1
1
1
0
1
Basic Switch Management
59