[Cnt Ac-S] Change Pair Option; [Cnt Ac-S] Function Switch; [Cnt Ac-S] Paircreate - HP StorageWorks P9000 - Disk Arrays Reference Manual

Hp storageworks p9000 audit log user and reference guide (av400-96333, january 2011)
Hide thumbs Also See for StorageWorks P9000 - Disk Arrays:
Table of Contents

Advertisement

Item
Max Initial Copy
Num. of CUs

[Cnt Ac-S] Change Pair Option

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S],Change Pair Option,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{P-VOL(Port-G-ID-LUN),Fence Level,Result}
=[{1A-0x00-0x000,Never,Normal end},
{1A-0x00-0x001,Never,Normal end},
{1A-0x00-0x002,Never,Normal end},(snip)
-(snip)],Num. of Pairs=xx
Detailed Information
Item
P-VOL(Port-G-ID-LUN)
Fence Level
Result
Num. of Pairs

[Cnt Ac-S] Function Switch

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S],Function Switch,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+ Switch=0001 0100 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Detailed Information
Item
Switch

[Cnt Ac-S] Paircreate

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S],Paircreate,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),S/N,LDKC,ID,
Controller ID,Type,Initial Copy,Fence Level,
Description
The number of parallel operation of initial copy by CU. (1 to 16).
The number of CUs set.
Description
The port number, host group number and LUN of the primary volume where the pair option is
changed sequentially.
The changed fence level (the condition that MCU rejects Write to the primary volume).
Never: No condition, Data: S-VOL data, Status: S-VOL status
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of changed pairs.
Description
Each bit position (on/off) of the function switch information assigned by 64 bits. The
beginning of the string is bit 0 and the ending of it is bit 63. "0" indicates the bit is off,
and "1" indicates the bit is on.
In the example above, bit 3 and bit 5 are on and the other bits are off.
Continuous Access Synchronous Descriptions 149

Advertisement

Table of Contents
loading

Table of Contents