Restoring The System Configuration Settings - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Example:
switch:admin> configupload
Server Name or IP Address [host]: 192.168.15.42
User Name [user]: johndoe
File Name [config.txt]: config-switch.txt
Password:xxxxx
configuration complete
switch:admin>

Restoring the System Configuration Settings

System Configurations can be saved through the Fabric OS, or through Fabric
Manager. To back up or restore system configuration settings through Fabric
Manager, refer to the HP StorageWorks Fabric Manager Version 3.0.x User
Guide.
To restore the system configuration settings from a backup:
1. Verify that the FTP service is running on the host workstation.
2. Log into the switch as the admin user.
3. Shut down the switch by entering the switchdisable command.
4. Enter the configdownload command at the command line. The command
5. At the Do you want to continue [y/n] prompt, select "y".
Example:
switch:admin> configdownload
Server Name or IP Address [host]: 192.168.15.42
User Name [user]: johndoe
File Name [config.txt]: config-switch.txt
Password:
This command is used to download a backed-up configuration
for a specific switch.
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
becomes interactive and you are prompted for the required information.
*** CAUTION ***
If using a file
Basic Switch Management
from a different
55