Displaying Whether Track Changes Are Enabled - HP StorageWorks MSA 2/8 - SAN Switch User Manual
Hp storageworks fabric os procedures v3.1.x/4.1.x user guide (aa-rs23c-te, june 2003)
Hide thumbs
Also See for StorageWorks MSA 2/8 - SAN Switch:
- Reference manual (982 pages) ,
- User manual (267 pages) ,
- Installation manual (72 pages)
Table of Contents
Advertisement
Basic Switch Management
Example:
switch:admin> errdump
Error 07
--------
0x17ef (fabos): Mar 24 11:10:27
Switch: 1, Info TRACK-CONFIG_CHANGE, 4, Config file change from
task:TRACKIPC
Error 06
--------
0x4e7 (fabos): Mar 24 11:10:24
Switch: 1, Info TRACK-TRACK_ON, 4, Track-changes on
Displaying Whether Track Changes are Enabled
To display the status of the Track Changes feature:
1. Log into the switch as the admin user.
2. At the command line, enter the trackchangesshow command.
The status of the track changes feature is displayed as either on or off. This also
displays whether the track changes feature is configured to send SNMP traps.
Example:
switch:admin> trackchangesshow
Track changes status: ON
Track changes generate SNMP-TRAP: NO
switch:admin>
64
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
Advertisement
Table of Contents
Troubleshooting
