HP StorageWorks MSA 2/8 - SAN Switch User Manual page 79

4. Enter Y for yes to continue with the reboot, when prompted.
Example: Displays a "prompted" firmware download.
switch:admin> firmwaredownload
Server Name or IP Address: 192.168.166.30
User Name: johndoe
File Name: /pub/dist/system.plist
Password: xxxxxx
Full Install (Otherwise upgrade only) [Y]:
Do Auto-Commit after Reboot [Y]:
Reboot system after download [N]:
Start to install packages......
dir ##################################################
terminfo ##################################################
<output truncated>
glibc ##################################################
sin ##################################################
Write kernel image into flash.
file verification SUCCEEDED
Firmwaredownload completes successfully.
5. (Optional) Open another telnet session and enter the
6. Enter the firmwareshow command after the switch reboots and the
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
or
Enter the firmwaredownload command to be prompted for parameters.
firmwaredownloadstatus command to monitor the
firmwaredownload status.
The switch will reboot and start the firmwarecommit after the firmware
is downloaded.
firmwarecommit finishes.
The firmware level is displayed for both partitions.
Firmware Download
79