Core Switch 2/64 Chassis; Displaying The Status Of All Slots In The Chassis - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Working With the Core Switch 2/64

Core Switch 2/64 Chassis

Chassis-wide commands display or control both logical switches.

Displaying the Status of All Slots in the Chassis

To display the status of slots in the chassis:
1. Log into the switch as the admin user.
2. Enter the slotshow command at the command line. This command
118
display the current status of each slot in the system. The format of the display
includes a header and four fields for each slot. The fields and their possible
values are as follows:
Slot
Blade Type
ID
Status
Displays the physical slot number.
Displays the blade type:
SW BLADE
The blade is a Switch.
CP BLADE
The blade is a Control Processor.
UNKNOWN
Blade not present or its type is not recognized.
Displays the hardware ID of the blade type.
Displays the status of the blade:
VACANT
The slot is empty.
INSERTED, NOT POWERED ON
The blade is present in the slot but is turned off.
DIAG RUNNING POST1
The blade is present, powered on, and running the
post initialization power on self tests.
DIAG RUNNING POST2
The blade is present, powered on, and running the
POST (power on self tests).
ENABLED
The blade is on and enabled.
Fabric OS Procedures Version 3.1.x/4.1.x User Guide