C
Figure 1: Graphic Illustration of Core Switch 2/64
About the Slot/Port Method
A new method of selecting ports is required in the Core Switch 2/64. To select a
specific port you must identify both the slot number and port number you are
working with.
When specifying a particular slot and port for a command, the slot number
operand must be followed by the slash ( / ), and then a value for the port number.
The following example shows how to enable port 4 on a switch blade in slot 2.
Example
switch:admin> portenable 2/4
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
Working With the Core Switch 2/64
111