Firmware Versions; Displaying The Firmware Version And Information; Switch Series And Applicable Firmware - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Firmware Versions

Different StorageWorks Fibre Channel switches run different versions of Fabric
OS firmware. The following table describes the switch series and the
corresponding firmware:
Table 3: Switch Series and Applicable Firmware
StorageWorks 1 Gb SAN
switches
SAN Switch 2/8 EL and
SAN Switch 2/16 series
SAN Switch 2/32 switch
Core Switch 2/64 switch

Displaying the Firmware Version and Information

To display the firmware version:
1. Log into the switch as the admin user (refer to
2. Enter the version command at the command line. This command displays
The following example shows the firmware version information on a Core Switch
2/64.
Example: Core Switch 2/64
switch:admin> version
Kernel: 2.4.2
Fabric OS: v4.1
Made on: Sun Jan 12 01:09:45 2003
Flash: Sun Jan 12 13:25:49 2003
BootProm: 3.1.18
switch:admin>
The following information is displayed in the version command:
Kernel
Fabric OS Procedures Version 3.1.x/4.1.x User Guide
Switch Type
the Kernel version, Fabric OS release number, and other information about the
firmware.
Displays the version of switch kernel operating system
Correct Firmware
Fabric OS 2x
Fabric OS 3x
Fabric OS 4x
Fabric OS 4x
"Switch
Basic Switch Management
Login" on page 21).
49