Editing And Clearing Auto-Dial Numbers - Sharp UX-P410 User Manual

Sending a Fax by Automatic Dialling

Editing and clearing auto-dial numbers

If you need to make changes to a previously stored auto-dial number, or clear
a number, follow these steps:
1
FUNKTION
Press
2
Press
the display.
3
Press
4
Select EDIT or CLEAR:
EDIT:
1
•
If you selected CLEAR, go to Step 8.
5
If you selected EDIT, make the desired changes to the number.
•
Press
change, and then enter the new digit. The new digit will replace the old
digit.
•
If you do not wish to change the number, go directly to Step 6.
START/SPEICHER
6
Press
7
Make the desired changes to the name.
•
Press
change, and then press the appropriate number key repeatedly until the
desired letter appears (see Step 5 on page 33). The new letter will replace
the old letter.
•
If you do not wish to change the name, go directly to Step 8.
34
once and
or until the number you wish to edit or clear appears in
once.
CLEAR:
2
or to move the cursor to the digit or digits you wish to
or to move the cursor to the letter or letters you wish to
once.
Display:
<NEW NUMBER>
1=EDIT, 2=CLEAR