HP StorageWorks 8B - FC Entry Switch Reference Manual page 192

3
FCFabric Element MIB Object Types
fcFxPortBbCredit [fcFxConfTable]
Syntax
FcBbCredit
Access
Read-only
Status
Mandatory
Description
The total number of receive buffers available for holding Class 1 connect-request, Class 2 or 3
frames from the attached NxPort. It is for buffer-to-buffer flow control in the direction from the
attached NxPort (if applicable) to FxPort.
fcFxPortRxBufSize [fcFxConfTable]
Syntax FcRxDataFieldSize
Access Read-only
Status
Mandatory
Description
The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the FxPort.
fcFxPortRatov [fcFxConfTable]
Syntax MilliSeconds
Access Read-only
Status Mandatory
Description The Resource_Allocation_Timeout Value configured for the FxPort. This is used as the time-out
value for determining when to reuse an NxPort resource such as a Recovery_Qualifier. It represents
E_D_TOV (see next object) plus twice the maximum time that a frame may be delayed within the
Fabric and still be delivered.
fcFxPortEdtov [fcFxConfTable]
Syntax MilliSeconds
Access Read-only
Status Mandatory
Description
The E_D_TOV value configured for the FxPort. The Error_Detect_Timeout Value is used as the
time-out value for detecting an error condition.
3-16 MIB Reference Manual Version 3.0