The Statistics Group
Port types are aggregated into a port type class, such as all the fabric port types. There is one
statistics table for each individual port. For all objects in statistics tables, if the object is not
supported by the conn unit then the high order bit is set to 1 with all other bits set to zero. The high
order bit is reserved to indicate if the object is supported or not. All objects start at a value of zero at
hardware initialization and continue incrementing till end of 63 bits and then wrap to zero.
Connectivity Unit Port Statistics Hub Table
The FC Entry Switch 8B, FC Switch 8B, and FC 16B do not
support statistics. This section is not applicable.
Connectivity Unit Port Statistics Fabric Table
The FC Entry Switch 8B, FC Switch 8B, and FC 16B do not
support fabric statistics. This section is not applicable.
Connectivity Unit Port Statistics SCSI Table
The FC Entry Switch 8B, FC Switch 8B, and FC 16B do not
support SCSI statistics. This section is not applicable.
Connectivity Unit Port Statistics LAN/WAN Table
The FC Entry Switch 8B, FC Switch 8B, and FC 16B do not
support LAN/WANstatistics. This section is not applicable.
MIB Reference Manual Version 3.0
Fibre Alliance MIB Object Types
2
2-87