HP StorageWorks 8B - FC Entry Switch Reference Manual page 236

4
FCSwitch MIB Object Types
swOperStatus
Syntax
Value
Integer
Access Read-only
Status Mandatory
Description The current operational status of the switch.
swAdmStatus
Syntax
Value
Integer
Access
Read-write
Status
Mandatory
Description
The desired administrative status of the switch. A management station may place the switch in a
desired state by setting this object accordingly.
Note:
4-14
Declaration Description
1 (online) The switch is accessible by an external Fibre Channel port.
2 (offline) The switch is not accessible.
3 (testing) The switch is in a built-in test mode and is not accessible by
an external Fibre Channel port.
4 (faulty) The switch is not operational.
Declaration Description
1 (online) Set the switch to be accessible by an external Fibre Channel
port.
2 (offline) Set the switch to be inaccessible.
3 (testing) Set the switch to run the built-in test.
4 (faulty) Set the switch to a "soft" faulty condition.
5 (reboot) Set the switch to reboot in 1 second.
6 (fastboot) Set the switch to fastboot in 1 second. Fastboot causes the
switch to boot but skip over the POST.
When the switch is in faulty state, only two states can be set: faulty and reboot/fastboot.
MIB Reference Manual Version 3.0