2
Fibre Alliance MIB Object Types
connUnitPortStatObject [connUnitPortTable]
Syntax
Object Identifier
Access
Read-only
Status
Mandatory
Description
This contains the OID of the first object of the table that contains the statistics for this particular
port. If this has a value of zero, then there are no statistics available for this port. The port type
information helps identify the statistics objects that are found in the table. From this point, one
would do a getnext to get the next statistics object. When the first part of the OID changes, the end
of table is reached.
Note:
connUnitPortProtocolCap [connUnitPortTable]
Syntax
Octet String of size 2
Access
Read-only
Status
Mandatory
Description
This is the bit mask that specifies the driver level protocol capability of this port.
Note:
The bits have the following definition:
0 = unknown
1 = Loop
2 = Fabric
4 = SCSI
8 = TCP/IP
16 = VI
32 = FICON
2-42
Mapped to connUnitPortStatFabricUnitId.
If this is not applicable, return all bits set to zero.
MIB Reference Manual Version 3.0