Setting Limit Of Use - Kyocera TASKalfa 181 Operation Manual

Job Accounting
New registration :
Please wait.
Limit in use :
End
Copy
Printer

Setting Limit of Use

You can set the limit of use for each registered account.
The items that can be set are shown below.
Item
Copy restriction
Print restriction
Output limit
Scanner
transmission limit
7-4
Account ID
: Able use
: Able use
Description of limit
Select whether to permit or prohibit copying.
Able to use: Permits copying.
Unable to use: Prohibits copying.
Select whether to permit or prohibit printing.
Able to use: Permits printing.
Unable to use: Prohibits printing.
Set the limit of total count of copying and printing.
No limit: Does not set the limit of count.
Counter limit: Set the limit of count (0 to 999,999).
Set the limit of count of scanner transmission if the optional
network scanner kit is installed.
No limit: Does not set the limit of count of scanner
transmission.
Counter limit: Set the limit of count of scanner transmission
(0 to 999,999).
Is not permitted: Prohibits use of scanner transmission.
4
Enter a one- to eight-digit ID-code using the
numeric keys.
A code from 0 to 99999999 can be input.
NOTE:
If you try to register an ID-code that has been
already input, an error occurs. Enter another ID-code.
5
Press the Enter key.
NOTE:
After the ID-code is registered, message
Please wait is displayed for several seconds.
6
Set the limit of use.
NOTE:
For the method of setting the limit of use, see
Setting Limit of Use on page 7-4.
7
Press to select End, and then press the
or
Enter key.
Reference page
7-5
7-5
7-6
7-6
OPERATION GUIDE