Kyocera TASKalfa 181 Operation Manual page 171

Original Orientation
Set the default original orientation.
Machine Default :
P. Type (2sided)
Specific P . Type
Orig. Orient.
Original Orientation :
Top Edge Top
*
Top Edge Left
Auto Sleep Time
Set the time that elapses before the auto sleep function is activated if you have turned on the auto sleep function
(see page 6-25).
Time that can be set:
Inch Specification— 1 to 240 minutes (in 1 minute increments)
Metric Specification— 1 to 120 minutes (in 1 minute increments)
NOTE:
It is recommended to set a longer time if you use the machine frequently, and to set a shorter time if
not.
For the inch specification machine, if the auto sleep function causes inconvenience for operation of this
machine, disable this function. It is recommended, however, to set a longer time before disabling this function.
On the inch specification machine, if you have disabled the auto sleep function, this item is not displayed.
Machine Default :
Specific P . Type
Orig. Orient.
Sleep Mode Time
Sleep Mode Time :
1 Min.
OPERATION GUIDE
: Fast Mode
: Top Edge
: Fast Mode
: Top Edge
1 : Min.
1-240 Min.
1
Display the Machine Default screen. (See How to
Display the Machine Default Screen on page 6-13.)
2
Press to select Orig. direction, and
or
then press the Enter key.
3
Press to select Top Edge Top or Top
or
Edge Left, and then press the Enter key.
4
Press the Reset key.
The message display returns to the copier basic
screen.
1
Display the Machine Default screen. (See How to
Display the Machine Default Screen on page 6-13.)
2
Press or to select Sleep mode time, and
then press the Enter key.
3
Press to select the desired time from 1 to
or
240 minutes [1 to 120 minutes], and then press the
Enter key.
System Menu
6
6-19