Job Separator - Kyocera TASKalfa 181 Operation Manual

Machine Default :
Sleep Mode Time
Low Power Time
Copy Otput Destn
Copy Output Destination :
Top Tray
*
Finisher
Fax Output Destination
Set the paper output destination with priority for received fax data and various reports.
Setting
Top tray
Finisher

Job separator

NOTE:
This item is displayed only if the optional fax kit and finisher or job separator are installed.
Machine Default :
Low Power Time : 1 Min.
Copy Otput Destn
Fax Output Destn
Fax Output Destination :
Top Tray
*
Finisher
OPERATION GUIDE
2
Press
then press the Enter key.
: 1 Min.
: 1 Min.
: Top Tray
3
Press
destination, and then press the Enter key.
4
Press the Reset key.
The message display returns to the copier basic
screen.
Output tray of main body
Optional finisher
Optional job separator
1
Display the Machine Default screen. (See How to
Display the Machine Default Screen on page 6-13.)
2
Press
then press the Enter key.
: Top Tray
: Top Tray
3
Press
destination, and then press the Enter key.
4
Press the Reset key.
The message display returns to the copier basic
screen.
or to select Copy Otput Destn, and
to select the desired output
or
Output destination
or to select Fax Otput Destn, and
to select the desired output
or
System Menu
6
6-21