Output Destination - Kyocera TASKalfa 181 Operation Manual

Paper Handling
MP Tray Mode
Feed Select
Duplex Mode
Duplex Mode
Back
None
Short Edge Bind

Output Destination

Set the paper output destination.
Setting
Output tray of main body
Top tray
Optional finisher
Finisher
Optional job separator
Job Separator
NOTE:
This item is displayed only if the optional finisher or job separator is installed.
Paper Handling
MP Tray Mode
Feed Select
Stack Select
Select Output Tray
Back
Top Tray
Finisher
OPERATION GUIDE
1
Display the Paper Handling screen. (See How to
Display the Paper Handling Screen on page 5-41.)
2
Press
press the Enter key.
3
Press
Long edge bind, and then press the Enter key.
4
Press the Reset key.
The message display returns to the printer basic
screen.
Output destination
1
Display the Paper Handling screen. (See How to
Display the Paper Handling Screen on page 5-41.)
2
Press
Slect], and then press the Enter key.
3
Press
destination, and then press the Enter key.
4
Press the Reset key.
The message display returns to the printer basic
screen.
Printing Functions
or to select Duplex Mode, and then
or to select Short edge bind or
or to select Stack Select [Stack
or to select the desired paper output
5
5-43