Kyocera TASKalfa 181 Operation Manual page 106

Printing Functions
Printing Private Print/Stored Job
In private printing, you can execute printing by using the operation panel to input the four-digit access code that
has been set with the printer driver when printing from your computer. The data is cleared after printing is
complete.
In the stored job mode, print data can be stored in the hard disk without access codes after printing is complete.
For the method of setting the respective functions with the printer driver, refer to the KX Printer Driver Operation
Guide.
e-MPS
Back
Quick Copy
Private/Stored
Select User Name
tom
Select JOB
List
List
Enter User ID
Select User Name
Copies
Delete
Deleting Private Print/Stored Job
Each stored job can be deleted manually as shown below. Jobs stored with the private print function are deleted
automatically when printing is complete or the power of this machine is turned off. Jobs stored with the stored
job function, however, are not deleted.
5-6
: 001
1
Display the e-MPS screen. (See How to Display the
e-MPS Screen on page 5-4.)
2
Press or to select Private/Stored, and
then press the Enter key.
3
Press or to select the user name, and then
press the Enter key.
The user name is the name that has been set with
the printer driver.
4
Press or to select the desired job name, and
then press the Enter key.
The job name is the name that has been set with
the printer driver.
5
Enter the four-digit access code using the numeric
key, and then press the Enter key.
The access code has been set with the printer
driver.
6
Enter the number of copies using the numeric key,
and then press the Enter key.
Printing starts.
1
Select the job to delete referring to steps 1 to 4 of
Printing Private Print/Stored Job.
OPERATION GUIDE