Kyocera TASKalfa 181 Operation Manual page 118

Printing Functions
Print KPDL Errs
Back
On
Off
KPDL (AUTO) Alternative Emulation Selection
If you set KPDL (AUTO), switching between KPDL and an alternative emulation mode will be automatically
performed according to print data. Continue the procedure from step 5 of emulation mode selection to set this
item as shown below.
Available emulation modes: PCL6, KC-GL, Line Printer, IBM Proprinter, DIABLO 630, EPSON LQ-850
KPDL(AUTO)
Back
Alt. Emulation
Print KPDL Errs
Alt. Emulation
Back
PCL 6
KC-GL
5-18
2
Press or to select On or Off, and then press
the Enter key.
If you set On, the details of any error will be printed.
3
Press the Reset key.
The message display returns to the printer basic
screen.
1
Press or to select Alt. Emulation, and
then press the Enter key.
2
Press or to select the desired emulation, and
then press the Enter key.
3
Press the Reset key.
The message display returns to the printer basic
screen.
OPERATION GUIDE