Kyocera TASKalfa 181 Operation Manual page 155

Enter Pin Code using # key.
Copy Default :
End
Density Mode
Original Image
Density Mode
Set the Default exposure mode: auto or manual.
Copy Default :
End
Density Mode
Original Image
Density Mode :
Auto
Manual
*
Original Image Quality
Set the default original image quality mode.
OPERATION GUIDE
3
Enter the four-digit management code using the
numeric keys.
The management code at the factory default
setting is 1800 for the 18 ppm model and 2200 for
the 22 ppm model.
NOTE:
changed. (See Administrator Management Code
Change on page 6-24.)
4
If the management code is accepted, the Copy
Default screen is displayed.
:
Manual
Next, perform the setting referring to the following
: Txt+Phto
description of each setting item.
NOTE:
screen indicates the current setting.
1
Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
2
Press
press the Enter key.
:
Manual
: Txt+Phto
3
Press
press the Enter key.
4
Press the Reset key.
The message display returns to the copier basic
screen.
1
Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
The four-digit management code can be
The * (asterisk) at an item on each setting
to select Exposure Mode, and then
or
to select Auto or Manual, and then
or
System Menu
6
6-3