Kyocera TASKalfa 181 Operation Manual page 166

System Menu
Machine Default :
End
Auto Cassette SW
Paper Size(1st)
Auto Cassette Switching
This machine can continue copying by switching the cassette to another cassette that contains paper of the
same size and the same orientation as the current paper when paper runs out in the currently selected cassette.
To prohibit switching to a cassette that has a different paper type, select On/Only same paper type.
NOTE:
On the 18 ppm model, this item is displayed only if the optional paper feeder is installed.
Machine Default :
End
Auto Cassette SW
Paper Size(1st)
Automatic Cassette Switching :
Off
*
On/All types of paper
On/Only same paper type
Paper Size (cassettes 1 to 4)
Set the paper sizes of cassettes 1 to 4. To detect the paper size automatically, set Auto Detection Metric
or Auto Detection Inch.
Sizes that can be set: 8
6-14
:
On
: Auto I
:
On
: Auto I
13", 8K, 16K
×
1/2
NOTE:
The four-digit management code can be
changed. (See Administrator Management Code
Change on page 6-24.)
4
If the management code is accepted, the Machine
Default screen is displayed.
Next, perform the setting referring to the following
description of each setting item.
NOTE:
The * (asterisk) at an item on each setting
screen indicates the current setting.
1
Display the Machine Default screen. (See How to
Display the Machine Default Screen on page 6-13.)
2
Press to select Auto Cassette SW, and
or
then press the Enter key.
3
Press to select On/All types of paper,
or
On/Only same paper type, or Off, and then
press the Enter key.
4
Press the Reset key.
The message display returns to the copier basic
screen.
OPERATION GUIDE