Interface
Back
Network
USB
Network Setting
Back
NetWare
TCP/IP
TCP/IP
Back
On
Off
DHCP
This machine supports DHCP (Dynamic Host Configuration Protocol). When using DHCP, turn DHCP On.
TCP/IP
On
Off
Change #
TCP/IP Setting
Back
DHCP
IP Address
DHCP
Back
On
Off
IP Address
Register the IP address of this machine.
NOTE:
The IP address that should be registered here differs depending upon your network environment.
Check with your network administrator before performing this setting.
If you use the following procedure to manually register the IP address, be sure to turn the DHCP setting Off
and the TCP/IP setting On.
OPERATION GUIDE
2
Press
or
to select Network, and then press
the Enter key.
3
Press
or
to select TCP/IP, and then press the
Enter key.
4
Press
or
to select On, and then press the
Enter key.
1
Display the TCP/IP screen referring to steps 1 to 5
of TCP/IP setting.
2
Press
or
to select Change #, and then press
the Enter key.
3
Press
or
to select DHCP, and then press the
Enter key.
4
Press
or
to select On, and then press the
Enter key.
1
Display the TCP/IP screen referring to steps 1 to 3
of TCP/IP setting.
Printing Functions
5
5-13